Filter
Top Products
37
ADJUSTING THE POI SETTINGS
You can choose when to have POIs shown on screen and the distance at which you
are alerted to them by adjusting the POI settings.
Tap Menu > Settings > Next> POIs.
Enable the POIs by checking the box. Disable by un-checking.
Choose to Show POIs Always, Never or When Stopped from the drop
down menu.
In the Report POIs this far ahead field, select a distance between 0.2
and 25 miles.
Select whether to show POIs that are on your route or nearby it by
checking one of the options.
Select specific POI categories to display by checking the boxes.
Tap OK to apply the settings and return to the Settings menu.
SELECTING A DESTINATION USING LAT AND LONG
If you know the latitude and longitude of your destination you can enter them directly.
Tap Menu > Destination scroll to the second screen and tap
Coordinates.
Choose to set the latitude and longitude in Degrees Minutes Seconds,
Decimal Degrees or Decimal Minutes.
Enter a latitude and longitude in the appropriate format depending on
which one you selected. The SPOTTER
will take a few moments to find
the point. When it is located a map will appear with the location pinpointed
by a red arrow.
Select Drive to begin navigating your route.