Filter
Top Products
4
WARNING: Failing to properly adjust and tighten the clamps and
retainers that affix the handlebars and folding system can cause you to
lose control and fall. When properly adjusted, you cannot twist the front
wheel out of line with the handlebars or move the T-tube out of
adjustment. If you can twist or force these components to move or
come off by hand, readjust and properly retighten the clamp
mechanisms.
2. Preparing for First-Time Use
2A. Un-box. Remove contents from box. Remove the foam separators
that protect the various components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents or
kinked cables that may have occurred during shipping. The scooter was
partially assembled and packed at the factory to prevent shipping
damage and there should not be any problems, even if the box has a
few scars or dents. But if there are, contact Razor USA, toll free, at
(866) 467-2967 to resolve any problems.
2B. Handlebars. Insert the “quill” part of the handlebar assembly into
the fork as shown in Figures 2a, 2b and 2c. You may have to loosen the
wedge (as pointed out in 2b) to allow it to slip into the fork. Slide the
• Bicycle-style tire pump for Schrader
valve tires, with pressure gauge.
• 5mm and 6mm hex key wrenches.
• Inflation valve extender/adapter
(supplied for E300 only).
• Razor recommends assembly by an
adult with experience in bicycle
mechanics. Some tools may be
supplied, however we recommend the
use of mechanic’s grade tools. Use
the supplied tools only as a last resort.
TOOLS REQUIRED FOR ASSEMBLY
WARNING: REGARDING USE OF NON-RAZOR PRODUCTS WITH YOUR RAZOR
SCOOTER. Your electric scooter has been built to Razor’s design specifications. All the original
equipment supplied at the time of sale were selected on the basis of their compatibility with the
frame, fork and all other parts. Certain after-market products may or may not be compatible with
your Razor electric scooter. Consult your retailer or call Razor prior to modifying or replacing
any component with a non-factory specified product.
WARNING: CHECK LOCAL LAWS REGARDING SCOOTER USE. Check local laws and
regulations to see where and how you may use your Razor electric scooter legally. In many
states and local areas scooter riders are required BY LAW to wear a helmet. Check local laws
and regulations regarding laws governing helmet use, age and e scooter operation in your area.
NOTE: Do not activate the speed control on the t-tube unless
you are on the scooter and in a safe, outdoor environment suitable
for riding. The E100 must be going 3 mph before motor will start.