Filter
Top Products
13
WHEEL REMOVAL/REPLACEMENT PROCEDURE
Occasionally the rear wheel may need to be removed to replace a worn
tire or fix a punctured inner tube. Tools required: 10mm open end and
socket wrenches, blade screwdriver, two (2) 13mm box wrenches or two
17mm box wrenches.
Fig. 15. Loosen brake cable anchor and disconnect Fig. 16. Loosen brake housing anchor and
the cable. disconnect.
Fig 17. Keep the spacer and washers Fig 18. Loosen both axle adjusters an equal
together! amount, about five turns.
Fig 19 & 20. Loosen the axle and push the wheel forward in the slots to loosen the belt as shown.