Filter
Top Products
LEARN REMOTE KEY
This display allows you to match Remote Keyless Entry
(RKE) transmitters to your vehicle. To match an RKE
transmitter to your vehicle:
1. Make sure the vehicle is in P (Park).
2. Press the vehicle information button until LEARN
REMOTE KEY PRESS
V TO BEGIN displays.
3. Press the set/reset button until REMOTE KEY
LEARNING ACTIVE is displayed.
4. Press and hold the lock and unlock buttons on the
first transmitter at the same time for about
15 seconds.
A chime will sound indicating that the transmitter is
matched.
5. To match additional transmitters at this time, repeat
Step 3.
Each vehicle can have a maximum of four
transmitters matched to it.
6. To exit the programming mode, you must cycle the
key to LOCK/OFF.
CALIBRATE COMPAS (Compass)
Your vehicle may have this feature. The compass can
be manually calibrated. To calibrate the compass
through the DIC, see DIC Compass on page 3-48.
CHANGE COMPASS ZONE
Your vehicle may have this feature. To change the
compass zone through the DIC, see DIC Compass on
page 3-48.
Blank Display
This display shows no information.
FEATURE SETTNGS (Settings): PRESS V
TO SELCT (Select)
This display allows you to personalize the feature
settings on your vehicle. See DIC Vehicle
Personalization on page 3-59 for more information.
3-47