Filter
Top Products
55
OPERATION
Break-In Period
The break-in period for your new Polaris Quadricycle is the first ten
hours of operation, or the time it takes to use the first two full t anks of
gasoline. No single action on your part will increase the life and
performance of your Quadricycle more than following the procedures
for a proper break-in. Careful treatment of a new engine will result in
more efficient performance and a longer life.
Do not operate at full throttle or high speeds for extended periods
during the first three hours of use.
Perform the following procedures carefully.
1. Fill the fuel tank with gasoline.
2. Check the oil level on t he dipstick. Add oil if necessary.
Seepage67.
3. Select an open area that allows room to familiarize yourself with
vehicle operation and handling.
4. Drive slowly. Vary throttle positions. Do not operate at sustained
idle.
5. Perform regular checks on fluid levels, controls and areas outlined
on the daily pre-ride inspection checklist. See page 56.
6. Pull only light loads.
7. Perform the break-in oil change at one month.