Filter
Top Products
53
FEATURES AND CONTRO LS
Instrument Cluster
Rider Information Center
Diagnostic Mode
The diagnostic mode is for informational purposes only. Please return
your Quadricycle to your dealer for all major repairs.
The wrench icon will display when the gauge is in the diagnostic
mode.
Steps to enter the diagnostic mode:
1. Turn the main key switch off and wait 10 seconds.
2. Shift the transmission into neutral or park.
3. Hold the mode button and turn the main key switch on.
4. Release the switch as soon as the display is activated.
5. Use the mode button to toggle through the six (6) diagnostic
screens.
Three (3) ways to leave the d iagnostic mode:
S Shift the transmission out of neutral.
S Turn the main key switch off and on.
S Move the tires.
Screen 1: Battery voltage
Screen 2: Tachometer
Screen 3: AWD diagnostic
This screen indicates whether or not current is flowing through the
AWD system.
Screen 4: Gear circuit diagnostic
This screen displays the resistance value (in ohms) being read at the
gear switch input.