94
SPECIFICATIONS
Phoenix 200
Maximum Weight Capacity 285 lbs. (129 kg) (includes weight of operator,
cargo and accessories)
Dry Weight 395 lbs. (179 kg)
Fuel Capacity 2.5 gal. (9.5 l)
Engine Oil Capacity 41 oz. (1200 ml)
Transmission Oil 18.6 oz. (550 ml)
Rear Gearcase Oil 4 oz. (120 ml)
Rear Rack Capacity 70 lbs. (31.7 kg)
Hitch Tongue Weight Capacity 30 lbs. (13.6 kg) (Rear rack weight and tongue
weight not to exceed 30 lbs./13.6 kg)
Hitch Towing Weight Capacity 300 lbs. (136 kg)
Overall Length 65 in. (165 cm)
Overall Width 42 in. (106.7 cm)
Overall Height 42 in. (106.7 cm)
Wheelbase 45 in. (114.3 cm)
Ground Clearance 5.7 in. (14.5 cm)
Minimum Turning Radius 65 in. (165.1 cm) unloaded
Engine Type 4-Cycle, Single Cylinder
Lubrication Wet sump
Engine Cooling Air
Displacement 196 cc
Bore x Stroke 65 x 59
Alternator Output 210w @5000 rpm
Compression Ratio 9.2:1 Full Stroke
Carburetor 1 / 22 mm (VM Type)
Pilot Jet 40
Main Jet 98
Air Screw 1 Turn Out
Jet Needle 2MKNN-4 clip
Ignition System DC CDI
Ignition Timing 32° +/- 2° @ 3000 RPM
Spark Plug / Gap NGK CR6HSA / 0.6-0.7 mm
Driving System Type Constant Variable Transmission (CVT)
Shift Type Side Lever (F/N/R)