Filter
Top Products
35
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 26
62
Brake fluid Ensure proper level 29
Foot brake Ensure proper operation 27
Front suspension Inspect, lubricate if necessary 56
Rear suspension Inspect, lubricate if necessary 56
Steering Ensure free operation -
Tires Inspect condition and pressure 66
Wheels/fasteners Inspect, ensure fastener tightness 66
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 30
57
Coolant level (if applicable) Ensure proper level -
Coolant hoses (if applicable) Inspect for leaks -
Throttle Ensure proper operation 25
90
Indicator lights/switches Ensure operation 24
Engine stop switch Ensure proper operation 24
Air filter, pre-filter Inspect, clean 68
Air box sediment tube Drain deposits whenever visible -
Headlight Check operation, apply Polaris dielec-
tric grease when lamp is replaced
24
69
Brake light/tail lamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
69
Riding gear Wear approved helmet, goggles, and
protective clothing
8