Filter
Top Products
88
MAINTENANCE
PVT System
PVT Drying
If water is ingested into the PVT
system, dry it before operating
the vehicle.
1. Move the vehicle out of the
water.
2. Place the transmission in
PARK.
WARNING
Do not modify any component of the PVT system. Doing so may reduce its
strength so that a failure may occur at a high speed. The PVT system has
been precision balanced. Any modification will cause the system to be out of
balance, creating vibration and additional loads on components.
The PVT system rotates at high speeds, creating large amounts of force on
clutch components. Extensive engineering and testing has been conducted
to ensure the safety of this product. However, as the owner, you have the
following responsibilities to make sure this system remains safe:
• Always follow all recommended maintenance procedures. See your dealer
as outlined in the owner's manual.
• This PVT system is intended for use on Polaris products only. Do not
install it in any other product.
• Always make sure the PVT housing is securely in place during operation.