Polaris 9920788 Offroad Vehicle User Manual


 
78
MAINTENANCE
Air Filter/Breather Filter
Always clean and replace the air and breather filters at the intervals out-
lined in the Periodic Maintenance Chart beginning on page 53.
1. Position the vehicle on a level
surface.
2. Place the transmission in PARK.
3. Remove the seat.
4. Release the air box
cover clips, and remove
the air box cover.
5. Remove the air filter.
6. Remove the sleeve from
the filter.
7. Wash the sleeve in soapy
water, then rinse and let
dry.
8. Remove the breather fil-
ter. Wash the breather
filter in soapy water,
then rinse and let dry.
9. Reinstall the breather filter.
10. Reinstall the sleeve over the air filter. Replace the filter if needed.
11. Reinstall the air filter into the air box. Tighten the clamp. Do not
over-tighten the clamp, as filter damage could occur.
12. Reinstall the air box cover and the seat.
CAUTION
Operation of your vehicle without a breather filter can cause engine damage.
Always reinstall the breather filter after removing it for service.
Air Filter
Clips
Breather
Filter
Sleeve