Filter
Top Products
76
MAINTENANCE
Tires
Refer to the specifications section beginning on page 112 for recom-
mended tire type, size and pressure.
Tire Tread Depth
Always replace tires
when tread depth is
worn to 3 mm or less.
Front Wheel Hub Tightening
Front wheel bearing tightness and spindle nut retention are critical com-
ponent operations. All service must be performed by your authorized
Polaris dealer.
Wheel Nut Torque Specifications
Check the wheel nut torques occasionally and when they've been loos-
ened for service.
WARNING
Operating your vehicle with worn tires, improperly inflated tires, non-standard
tires or improperly installed tires will affect vehicle handling and could cause
an accident.
Maintain proper tire pressure as described on the decal on your vehicle and
in the specifications section of the owner's manual.
Use only original equipment size and type when replacing tires.
Make sure the wheels are installed properly.
Replace tires when the tread depth measures 3 mm or less.
Item Specification
Front Wheel Nuts 27 ft. lbs. (37 N-m)
Rear Wheel Nuts 27 ft. lbs. (37 N-m)
3 mm