Filter
Top Products
35
FEATURES AND CONTROLS
Brakes
The braking system is controlled by the two brake levers located on the
handlebars, directly in front of each handgrip.
Service Brakes
The service brake lever (1) is located on the left handlebar. This lever
controls both front and rear wheel braking action. Use this lever for
normal braking.
Apply the service brakes by squeezing the left brake lever toward the
handlebar. These brakes are hydraulically activated disc brakes.
Always test brake lever travel and check the reservoir fluid level before
riding. The lever should feel firm when squeezed. Any sponginess
would indicate a possible fluid leak or low master cylinder fluid level,
which must be corrected before operating. See your dealer for proper
diagnosis and repairs.
Auxiliary Brakes
The auxiliary brake lever (2) is located on the right handlebar. It
controls braking action for the middle axle (rear brake) only. Use the
auxiliary brakes for additional braking or if the service brake system
fails.
WARNING
Operating the vehicle with a spongy brake lever can result in loss
of brakes, which could cause an accident and lead to serious
injury or death. Never operate the vehicle with a spongy-feeling
brake lever.
1
2