Polaris 6X6 Offroad Vehicle User Manual


 
110
MAINTENANCE AND LUBRICATIO N
Cleaning and Storage
Storage Tips
If your vehicle will be placed in extended or off season storage,
perform all necessary repairs and thoroughly clean the vehicle. Drain
the recoil housing. Remove the battery and store it in a cool, dry place.
See the battery section beginning on page 102.
Fluid Levels
Inspect the following fluid levels and change if necessary: front
gearcase; transmission; front hubs; brake fluid (change every two years
or as required if fluid looks dark or contaminated).
Engine
1. Support the front end of t he machine so the engine is level or tilted
slightly rearward.
2. Remove the spark plug, rotate the piston to BDC and pour
approximately two ounces of Premium 4 Synthetic 4-cycle oil into
the cylinder. R einstall the spark plug.
3. Apply dielec tric gre a se to the inside of the spar k plug cap and install
the cap onto the plug.
4. Turn the engine over several times, using t he recoil starter, to
ensure coverage of piston rings, cylinder walls and crankshaft
bearings.
5. Treat the fuel system with Polaris Carbon Clean.
6. If Polaris fuel system additive is not used, the fuel tank, fuel lines,
and carburetor should be completely drained of gasoline.