Filter
Top Products
94
MAINTENANCE
General Maintenance
Spark Plug Removal and Replacement
1. Remove the spark plug cap.
2. Using the special wrench provided in
the tool pouch, rotate the spark plug
counterclockwise to remove.
3. Reverse the procedure for spark plug
installation.
4. Torque to 18-22 ft. lbs. (24-30 Nm).
5. Reinstall the spark plug cap.
Oil Lines
Inspect oil line condition every 1000 miles (1600 km).
Oil Filter
The oil filter is located at the side of
the oil tank. Have your dealer change
the oil filter and bleed the system
annually or every 1000 miles (1600
km).
NOTE: The direction of the arrows
indicates the direction of
flow through the filter.