Polaris 600 Fusion Offroad Vehicle User Manual


 
129
TROUBLESHOOTING
M-10 Suspension Troubleshooting
Problem Solution
Rear suspension bot-
toms too easily
Increase FRA position (see setup decal under hood for ini-
tial position.
Install appropriate optional center retainer on rear track
shock (see page 55).
Increase front track shock coil spring preload.
Revalve rear track shock compression damping (see your
dealer).
Check track tension (see page 114).
Rides too stiff in rear Decrease FRA position (see setup decal under hood).
Install appropriate optional center retainer on rear track
shock (see page 55).
Decrease front track shock coil spring preload.
Revalve rear track shock compression damping (see your
dealer).
Check track tension (see page 114).
Machine darts from
side to side
Make sure skis are aligned properly.
Make sure spindles and all steering components turn freely.
Check for excessive play in steering assembly (see your
dealer).
Make sure skags are straight on skis.
Set static sag (see page 52).
Ensure use of Accu-Trak dual skags.
Front end pushes Check for worn skags.
Check for binding suspension shafts and grease all pivot
points.
Shorten front limiter strap.
Install single skags (see your dealer).
Steering is heavy Make sure spindles and all steering components turn freely.
Check ski alignment.
Check skags and skis for damage.
Decrease IFS preload.