Polaris 600 Fusion Offroad Vehicle User Manual


 
128
TROUBLESHOOTING
IQ Suspension Troubleshooting
Problem Solution
Rear suspension bot-
toms too easily
Adjust torsion spring preload to achieve proper static sag
(see page 47).
Change torsion spring to stiffer optional spring (see your
dealer).
Revalve rear track shock (see your dealer).
Rides too stiff in rear Check for binding suspension shafts and grease all pivot
points.
Adjust torsion spring preload to achieve proper static sag
(see page 47).
Change torsion spring to softer optional spring (see your
dealer).
Check track tension (see page 114).
Machine darts from
side to side
Check ski alignment (see page 118).
Make sure spindles and all steering components turn freely.
Check for excessive play in steering assembly (see your
dealer).
Ensure skags are straight on skis.
Set static sag (see page 47).
Check rail slide/replace if worn (see page 120).
Install Accu-Trak dual skags (see your dealer).
Front end pushes Check for worn skags.
Set static sag (see page 47).
Install single skag (see your dealer).
Rotate RRSS to high position (see page 51).
Steering is heavy Make sure spindles and all steering components turn freely.
Check ski alignment (see page 118).
Check skags and skis for damage.
Set static sag (see page 47).