Filter
Top Products
43
CONTROLS
Automatic Transmission Gear Selector
The transmission gear selector is located on the right
side of the vehicle directly above and forward of the
engine. It has five positions: high (H), low (L),
neutral ( N), reverse (R) and park (P).
To shift into high or park, yo u must first depress the
auxiliary brake to activate the high/park lock-out
mechan ism.
When shifting out of high or park, it’s not necessary
to depress the brake.
Whenever the ATV is left unattended, always place the transmission in
park and lock the parking brake.
Maintaining shift linkage adjustment is important to assure proper
transmission function. See your dealer if you experience any shifting
problems.
Belt Li fe
To exte nd belt life, use low for wa rd gea r in hea vy pulling s itua tions and
when opera ting at l ess than seven miles p e r hour for extended periods of
time.
H
N
R
L
P
Shifti ng gears with the engine speed above idle or while the
vehicle is m oving could cause transmission damage.
To change gears, stop the vehicle, and with the engine idling,
move the lever to th e desired gear. Depress the auxiliary brake if
shifti ng into high or park.
CAUTION