Polaris 120 Pro X Offroad Vehicle User Manual


 
86
WARRANTY
Conditions and Exclusions
In order to qualify for warranty, the product must have been properly set up and tested by
a Polaris Dealer (if applicable). Failure of any dealer to perform the required vehicle Pre--
Delivery Inspection, perform all applicable service bulletins and have the consumer sign
the PDI form prior to delivery may void the warranty. Failure to provide proof of re-
quired periodic maintenance upon request may result in denial of warranty coverage. Use
of the recommended Polaris products for lubrication and maintenance as directed by the
Owner’smanual is highly recommended. Should a failure occur during the warranty
period resulting from the use of non-recommended products, warranty coverage may be
denied.
Warranty does not apply to parts exposed to friction surfaces, stresses, environmental
conditions and/or contamination. The following items are excluded from warranty con-
sideration if the failure was due to wear or not the direct result of a defect:
Skis Ski wear rods
Tracks Slide rails
Suspension components Finished and unfinished surfaces
Brake components Carburetor/Throttle body components
Seat components Engine components
Clutches and components Drive belts
Steering components Hydraulic components
Batteries Circuit breakers/Fuses
Light bulbs/Sealed beam lamps Electronic components
Idler wheels
Warranty applies to the product only and does not allow for coverage of personal loss.
Some items are considered “consumable,” meaning they are considered part of normal
maintenance or part of completing an effective repair . The following items are excluded
from warranty coverage in the event of a warranty claim:
Spark Plugs Lubricants such as oil, grease, etc.
Filters Batteries (unless defective)
Fuel C osmetic damage/repair
Sealants Coolants
Hotel fees Meals
Towing charges Shipping/ handling fees
Mileage Product pick-up/delivery
Rentals/Loss of product use Loss of vacation/personal time
This warranty also excludes failures resulting from improper lubrication; improper en-
gine timing; improper fuel; surface imperfections caused by external stress, heat, cold or
contamination; operator error or abuse; improper component alignment, tension, adjust-
ment or altitude compensation; failure due to snow, water , dirt or other foreign substance
ingestion/contamination; improper maintenance; modified components; use of aftermar-
ket components resulting in failure; unauthorized repairs; repairs made after the warranty
period expires or by an unauthorized repair center; use of the product in competition or
for commercial purposes. Warranty will not apply to any product which has been dam-
aged by abuse, accident, fire or any other casualty not determined a defect of materials or
workmanship.