Filter
Top Products
74
ADULT SECTION
Maintenance
Steering Inspection and Adjustment
The steering assembly of the
machine should be checked
periodically for loose nuts and
bolts. See A,B,C,D,E, F, and
G in illustration at right.
With handlebars in straight
ahead position and measuring
from the straight edge of the
skis, the measurement
between the skis at point H
should be 1/8 inches greater
than point I, as shown on the
following page.
NOTE: This measurement
should be taken with
the vehicle weight
compressing t he
suspension. If the
skis are misaligned,
we recommend that
your dealer make the
necessary
adjustments.
F
E
D
C
B
A
H
I
G