Filter
Top Products
28
Northstar 8000i 15" Monitor Installation Manual
1. Press the MENU key to show the OSD Display Function Menu. (If you are displaying
the Northstar 8000i system, this continues to be shown in the background in a
dimmed state.)
2. Use the up and down arrow keys to select the Touch option. The selected item is
highlighted.
3. An CROSS icon shows that the Touch Screen functionality is de-activated, a TICK
icon shows that it is activated.
4. Press the OK key to change the setting. (Press OK again to toggle between the
settings.)
5. When the Touch option is at the required setting, press the MENU key to confirm
the new setting and to exit the OSD menus.
14.5 Display the OSD Setup menu
1. Press the MENU key to show the first level of OSD menus. (If you are displaying the
Northstar 8000i System, this continues to be shown in the background in a dimmed
state.)
2. Use the up and down keys to select the OSD Setup. The selected item is
highlighted.