Filter
Top Products
Main Menu
“Connect phone”
᭺
A
“Add phone”
᭺
B
Initiate from handset
᭺
C
Name phone
᭺
D
1. Press the button on the steering
wheel. The system announces the available
commands.
2. Say: “Connect phone”
᭺
A
. The system ac-
knowledges the command and announces
the next set of available commands.
3. Say: “Add phone”
᭺
B
. The system acknowl-
edges the command and asks you to initiate
connecting from the phone handset
᭺
C
.
The connecting procedure of the cellular
phone varies according to each cellular
phone model. See the cellular phone Own-
er’s Manual for details. You can also visit
www.nissanusa.com/bluetooth for instruc-
tions onconnecting NISSAN recommended
cellular phones.
When prompted for a Passkey code, enter
“1234”from the handset.The Passkey code
“1234” has been assigned by NISSAN and
cannot be changed.
4. The system asks you to say a name for the
phone
᭺
D
.
If the name is too long or too short, the
system tells you, then prompts you for a
name again.
Also, if more than one phone is connected
and the name sounds too much like a name
already used, the system tells you, then
prompts you for a name again.
Making a call by entering a phone
number
Main Menu
“Call”
᭺
A
“Phone Number”
᭺
B
Speak the digits
᭺
C
“Dial”
᭺
D
1. Press the button on the steering
wheel. A tone will sound.
2. Say: “Call”
᭺
A
. The system acknowledges
the command andannounces the next set of
available commands.
Say: “Special Dialing” to dial more than 10
digits or any special characters.
3. Say “Phone Number”
᭺
B
. The system ac-
knowledges the command and announces
the next set of available commands.
4. Say thenumber you wishto call startingwith
the area code in single digit format
᭺
C
.Ifthe
system has trouble recognizing the correct
phone number, try entering the number in
the following groups: 3-digit area code,
3-digit prefix and the last 4-digits. For ex-
ample, 555-121-3354 can be said as “five
five five” as the 1st group, then “one two
one” as the 2nd group, and “three three five
four”as the 3rd group. For dialing more than
10 digits or any special characters, say
“Special Dialing”. See “How to say num-
bers” in this section for more information.
5. When youhave finished speaking thephone
number, the system repeats it back and an-
nounces the available commands.
6. Say: “Dial”
᭺
D
. The system acknowledges
the command and makes the call.
For additional command options, see “List of
voice commands” in this section.
Receiving a call
When you hear the ring tone, press the
button on the steering wheel.
4-124 Monitor, climate, audio, phone and voice recognition systems