Filter
Top Products
When the shift selector is shifted into the R
(Reverse) position,themonitor displayshows the
view to the rear of the vehicle.
The system is designed as an aid to the driver in
detecting large stationary objects to help avoid
damaging the vehicle. The system will not detect
small objects below the bumper and may not
detect objects close to the bumper or on the
ground.
WARNING
● The rear view camera is a convenience
but itis nota substitutefor properback-
ing up. Always turn and check that it is
safe to do so beforebacking up. Always
back up slowly.
● Objects viewed in the RearView Moni-
tor differ from actual distance because
a wide-angle lens is used.
● Make sure that the trunk is securely
closed when backing up.
● Underneath the bumper and the corner
areas of the bumper cannot be viewed
on the RearView Monitor because of its
monitoring range limitation.
● Do not put anything on the rear view
camera. The rear view camera is in-
stalled above the license plate.
● When washing the vehicle with high-
pressure water, be sure not to spray it
around the camera. Otherwise, water
may enter the camera unit causing wa-
ter condensation on the lens, a mal-
function, fire or an electric shock.
● Do not strike the camera. It is a preci-
sion instrument. Otherwise, it may mal-
function or cause damage resulting in a
fire or an electric shock.
CAUTION
Do not scratch the camera lens when
cleaning dirt or snow from the lens.
HOW TO READ THE DISPLAYED
LINES
Guiding lines which indicate the vehicle width
and distances to objects with reference to the
vehiclebody line
᭺
A
aredisplayed onthe monitor.
Distance guide lines:
Indicate distances from the vehicle body.
● Red line
᭺
1
: approx. 1.5 ft (0.5 m)
● Yellow line
᭺
2
: approx. 3 ft (1 m)
● Green line
᭺
3
: approx. 7 ft (2 m)
● Green line
᭺
4
: approx. 10 ft (3 m)
LHA1196
REARVIEW MONITOR (if so
equipped)
4-34 Monitor, climate, audio, phone and voice recognition systems