Filter
Top Products
iPodா* PLAYER OPERATION
WITHOUT NAVIGATION SYSTEM (if
so equipped)
Connecting iPodா
To connect an iPodா to the vehicle so that the
iPodா can be controlled with the audio system
controls and display screen, use the USB jack
located in the center console. Open the protec-
tive cover
᭺
1
on the USB jack in the center
console. Then connect the iPodா-specific end of
the cable to the iPodா and the USB end of the
cableto theUSB jackonthe vehicle.Ifyour iPodா
supports charging via a USB connection, its bat-
tery will be charged while connected to the ve-
hicle with the ignition switch in the ACC or ON
position.
While connected to the vehicle, the iPodா can
only be operated by the vehicle audio controls.
To disconnectthe iPodாfrom the vehicle,remove
the USB end of the cable from the USB jack on
the vehicle, then remove the cable from the
iPodா.
*iPodா is a trademark of Apple Inc., registered in
the U.S. and other countries.
Compatibility
The following models are compatible:
● iPodா Classic - 1st through 6th generation
● iPodா Mini - 1st and 2nd generation
● iPodா Nano - 1st through 3rd generation
● iPodா Touch - 1st generation
● iPhoneா - 1st generation
Make sure thatyour iPodா firmwareis updated to
the version indicated above.
Audio main operation
Place the ignition switch in the ACC or ON
position. Press the AUX button repeatedly to
switch to the iPodா mode.
If the system has been turned off while the iPodா
was playing, pressing the VOL/ON·OFF control
knob will start the iPodா.
AUX button:
When theAUX buttonis pressed withthe system
off and the iPodா connected, the system will turn
on. If another audio source is playing and the
iPodா is connected, press the AUX button re-
peatedly until the center display changes to the
iPodா mode.
WHA1366 LHA1395
4-92 Monitor, climate, audio, phone and voice recognition systems