Filter
Top Products
INSTALLING TOP TETHER STRAP
(Rear bench seat – Crew cab models
only)
To access the anchor points
᭺
2
behind the rear
bench seat, tilt the rear seatback forward by
lifting up on the pull strap
᭺
1
behind the seat-
back.
Before securing the child restraint with the
LATCH lower anchors (rear outboard seating po-
sitions only [crew cab models only]) or the seat
belt, as applicable, follow these steps.
1. If necessary, raise or remove the headrest to
position the top tether strap
᭺
1
over the top
of the seatback. If the headrest is removed,
store it in a secure place. Be sure to reinstall
the headrest when the child restraint is re-
moved. See “Adjustable headrest” in
this section for headrest adjustment,
removal and installation information.
2. Position the top tether strap over the top of
the seatback and under the head restraint.
3. Secure the tether strap to the tether anchor
point on the seat directly behind the child
restraint.
4. Return the seatback to the locked position.
5. Refer back to child restraint installation
steps before tightening the tether strap.
If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.
Anchor point access
LRS0392
Rear bench seat (Crew cab models only)
LRS0576
1-52 Safety—Seats, seat belts and supplemental restraint system