Nissan 2010 Frontier Automobile User Manual


 
Track number mode displays the number
selected disc and the track that is currently
being played on the disk.
MP3 display mode
To change the text displayed when listening to an
MP3/WMA CD with MP3/WMA text (when CD
with text is being used), press the DISP button.
The DISP button will scroll through the CD textas
follows: File name ←→ Folder title ←→ Art-
ist ←→ Disc number ←→ Folder number.
To change the default display mode, press the
AUDIO knob repeatedly until DISPLAY MODE
appears on the display, then rotate the knob to
select the following display modes: File name
←→ Folder title ←→ Artist ←→ Disc number
←→ Folder number.
Once a display mode is selected, press the AU-
DIO knob again to store the setting.
Folder number mode displays the selected
folder number and the track number that is
currently being played.
Disc number mode displays the selected
disc number and the track number that is
currently being played.
Artist mode displays the artist title of the
MP3/WMA file.
File name mode displays the track title of the
MP3/WMA file.
Folder title mode displays the folder name
given to the MP3 folder.
Display satellite radio display mode (if so
equipped)
To change the text displayed when listening to
satellite radio (if so equipped) press the DISP
button. The DISP button will scroll through the
broadcast information as follows: Name ←→
Title ←→ Current display mode.
To change the default display mode press the
AUDIO button to display mode and press the
TUNE button to select the following display
modes: Channel number ←→ Channel name
←→ Name ←→ Title. Once the display mode is
selected press the AUDIO button again to store
the setting. If the AUDIO button is not pressed
after 8 seconds the display will refresh with the
last selected display mode setting.
Channel number mode displays the channel
number of the selected satellite radio sta-
tion.
Channel name mode displays the channel
name of the selected satellite radio station.
Name mode displays the name of the artist,
host or weather condition of the selected
satellite radio station.
Title mode displays the song title, show
name, or temperature of the selected satel-
lite radio station.
FM/AM/SAT radio operation
FM/AM/SAT band select:
Pushing the RADIO button will change the band
as follows:
AM ←→ FM or SAT (satellite, if so equipped)
When the RADIO button is pushed while the
ignition switch is in the ACC or ON position, the
radio will come on at the station last played.
The last station played will also come on when
the PWR/VOL control knob is depressed to ON.
No satellite radio reception is available when the
RADIO button is pressed to access satellite radio
stations unless optional satellite receiver and an-
tenna are installed and an XM satellite radio
service subscription is active. Satellite radio can
only be installed in vehicles that were factory
pre-wired for satellite radio. Satellite radio is not
available in Alaska, Hawaii and Guam. If satellite
radio is not operational then the RADIO button is
used to toggle between AM and FM bands.
Heater, air conditioner, audio and phone systems 4-31