Filter
Top Products
● Under the rear window behind the rear
bench seat (Crew cab only) as shown. ● On the floor between the jump seat belt
buckles in the center ofthe vehicle (Kingcab
only) as shown.
The anchor point
᭺
3
is located on the floor be-
tween the jump seat belt buckles in the center of
the vehicle. The routing bracket
᭺
2
is located
behind the cover plate
᭺
1
under the rear window
above the right passenger’s side jump seat.
REAR-FACING CHILD RESTRAINT
INSTALLATION USING LATCH (Crew
cab models only)
Refer to all Warnings and Cautions in the “Child
Safety” and “Child Restraint” sections before in-
stalling a child restraint.
Follow these steps to install a rear-facing child
restraint in the 2nd row seats using the LATCH
system:
1. Position the child restraint on the seat. Al-
ways follow the child restraint manufactur-
er’s instructions.
Rear bench seat (Crew cab models only)
LRS0393
Passenger’s side jump seat
(King cab models)
LRS0551
Safety—Seats, seat belts and supplemental restraint system 1-31