Filter
Top Products
SWITCH OPERATION
The windshield wiper and washer operates when
the ignition switch is placed in the ON position.
Push the lever down to operate the wiper at the
following speed:
᭺
1
Intermittent (INT) — intermittent operation
can be adjusted by turning the knob toward
᭺
A
(Slower) or
᭺
B
(Faster).
᭺
2
Low (LO) — continuous low speed operation
᭺
3
High (HI) — continuous high speed opera-
tion
Push the lever up
᭺
4
to have one sweep opera-
tion (MIST) of the wiper.
Pull the lever toward you
᭺
5
to operate the
washer. The wiperwill alsooperate severaltimes.
WARNING
In freezing temperatures the washer solu-
tion may freeze on the windshield and
obscure your vision which may lead to an
accident. Warm the windshield with the
defroster before you wash the windshield.
CAUTION
● Do not operate the washer continu-
ously for more than 30 seconds.
● Do not operate the washer if the
windshield-washer fluid reservoir is
empty.
● Do not fill the windshield-washer fluid
reservoir with windshield-washer fluid
concentrates at full strength. Some me-
thyl alcohol based windsheild-washer
fluid concentrates may permanently
stain the grille if spilled while filling the
windshield-washer fluid reservoir.
● Pre-mix windshield-washer fluid con-
centrates with water to the manufactur-
er’s recommended levels before pour-
ing the fluid into the windshield-washer
fluid reservoir. Do not use the
windshield-washer fluid reservoir to
mix the windshield-washer fluid con-
centrate and water.
WIC0854
WINDSHIELD WIPER AND WASHER
SWITCH
2-24 Instruments and controls