Filter
Top Products
᭺
1
Pull the hood lock release handle located
below the driver’sside instrument panel. The
hood will spring up slightly.
᭺
2
Push the lever at the front of the hood to the
side as illustrated with your fingertips and
raise the hood.
᭺
3
Insert the support rod into the slot on the
underside of the hood.
When closing the hood, return the hood rodto its
original position. Lower the hood approximately
12 inch (30 cm) above the latch and release it.
This allows proper engagement of the hood latch.
WARNING
● Make sure the hood is completely
closed and latched before driving. Fail-
ure to do so could cause the hood to fly
open and result in an accident.
● If you see steam or smoke coming from
the engine compartment, to avoid injury
do not open the hood.
FUEL-FILLER CAP
The fuel-filler cap is a ratcheting type. Turn the
cap counterclockwise to remove. To tighten, turn
the cap clockwise until ratcheting clicks are
heard.
LPD0302 LPD0263
HOOD FUEL-FILLER DOOR
3-10 Pre-driving checks and adjustments