Filter
Top Products
2. Remove the filter cover bolt and remove the
filter cover.
NOTE:
The filters are marked with air flow arrows.
The end of the filter with the arrow should
face the rear of the vehicle. The arrows
should face downward.
3. Insert thefirst filterinto the housingand slide
it over to the right. Insert the second filter
into the housing.
4. Replace the filter cover.
5. Install the glove box door.
6. Fill out the date information on the small
replacement label and attach it to the glove
box lid.
CLEANING
If your windshield is not clear after using the
windshield washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.
Cleanthe outsideof thewindshield witha washer
solution or a mild detergent. Your windshield is
clean ifbeads do notform when rinsingwith clear
water.
Clean eachblade by wiping itwith a clothsoaked
in a washer solution or a mild detergent. Then
rinse the blades with clear water. If your wind-
shield is still not clear after cleaning the blades
and using the wiper, replace the blades.
CAUTION
Worn windshield wiper blades can dam-
age the windshield and impair driver
vision.
LDI0387 LDI0404
WINDSHIELD WIPER BLADES
8-18 Maintenance and do-it-yourself