Nissan 2010 Automobile User Manual


 
Security indicator light
The security indicator light blinks whenever the
ignition switch is placed inthe LOCK, OFF or ACC
position. This function indicates the NISSAN Ve-
hicle Immobilizer System is operational.
If the NISSANVehicle ImmobilizerSystem is mal-
functioning, the light will remain on while the
ignition switch is placed in the ON position.
If the light still remains on and/or the en-
gine will not start, see a NISSAN dealer for
NISSAN Vehicle Immobilizer System ser-
vice as soon as possible. Please bring all
registered keys that you have when visiting
your NISSAN dealer for service.
SWITCH OPERATION
The windshield wiper and washer operates when
the ignition switch is in the ON position.
Push the lever down to operate the wiper at the
following speed:
1
Intermittent (INT) intermittent operation
can be adjusted by turning the knob toward
A
(Slower) or
B
(Faster). Also, the inter-
mittent operation speed varies in accor-
dance with the vehicle speed. (For example,
when the vehicle speed is high, the intermit-
tent operation speed will be faster.)
NOTE:
You can turn on or turn off the driving
speed dependent intermittent wiper func-
tion for vehicles with navigation system.
Refer to “Vehicle electronic systems”in the
“Display screen, heater, air conditioner and
audio systems”section laterin this manual.
2
Low(LO)— continuouslow speedoperation
3
High (HI) continuous high speed opera-
tion
Push the lever up
4
to have one sweep opera-
tion (MIST) of the wiper.
Pull the lever toward you
5
to operate the
washer. Thewiper will also operateseveral times.
WARNING
In freezing temperatures the washer solu-
tion may freeze on the windshield and
obscure your vision which may lead to an
accident. Warm the windshield with the
defroster before you wash the windshield.
LIC0474 LIC0965
WINDSHIELD WIPER AND WASHER
SWITCH
Instruments and controls 2-27