Filter
Top Products
Resetting fuel economy
The average fuel economy calculation can be
reset to 0. Press the TRIP button repeatedly until
the FUEL ECONOMY menu is shown, then ei-
ther:
● Select the “Reset” key on screen by press-
ing the ENTER button, or
● Press theTRIP buttonfor more thanapproxi-
mately 1.5 seconds.
Distance to empty (MI or km)
The Distance To Empty (DTE) modeprovides you
with an estimation of the distance that can be
driven before refueling. The DTE is constantly
calculated based on the amount of fuel in the fuel
tank and theactual fuel consumption. Thedisplay
is updated every30 seconds. When thefuel level
is low, the DTE display will change to (*).
NOTE:
● If the amount of fuel added while the ignition
switch is in the OFF position is small, the
display just before the ignition switch is
placed in the OFF position may continue to
be displayed.
● When driving uphill or rounding curves, the
fuel inthe tankshifts, whichmay momentarily
change the display.
Maintenance items
Press the TRIP button to display maintenance
information or set maintenance intervals for the
following:
● Engine Oil
● Tire Rotation
● Tire Pressure (if so equipped)
For settingthe Tire Pressuredisplay,refer to “Tire
pressure information” later in this section.
Changing the maintenance interval
Select the “Engine Oil” or “Tire Rotation” key
using the joystick and pressthe ENTER button to
display the screen to change the maintenance
interval.
Select the“Maintenance Schedule”keyusing the
joystick andmove the joystickto rightor left toset
the maintenance interval.
LHA0554 LHA0555
Display screen, heater, air conditioner, audio and phone systems 4-5