Filter
Top Products
3. During the 15 second interval, insert the
disc. The display changes to “Loading
Disc” .
4. The CD will play after the disc is set to a play
position.
5. The indicator changes from blinking disc
number indicator to solid disc number
indicator and the display changes to show
the Disc number icon, Disc number, Track
number and Elapsed time.
All disc loading
1. Press and hold the LOAD button until the
radio beeps (>1.5 seconds).
2. The numbered disc indicator on the lowest
available disc select button will start blink-
ing. The display shows “All Loading”.
3. The display changes to “Insert Disc” for a
maximum of 15 seconds.
4. During the 15 second interval, insert the
disc. The display changes to “Loading
Disc”.
5. The indicator changes from blinking num-
bered disc to solid numbered disc.
6. The disc number icon is turned on.
7. Repeat steps 2–5 until all discs are loaded,
then the last loaded disc will begin to play.
The display shows the Disc number, Track
number and Elapsed Time.
Selected disc loading
1. Press an available disc select button whose
indicator is off. The display shows “Please
Wait”.
2. The numbered disc indicator starts blink-
ing and the display shows “Insert Disc” for
15 seconds.
3. Insert the CD. The display shows “Loading
Disc”.
4. The CD will play after the disc is set to a play
position.
5. The indicator changes from blinking num-
bered disc to solid numbered disc and
the display shows the Disc icon, Disc num-
ber, Track number and Elapsed Time.
If a disc is not inserted within 15 seconds or if the
load button is pressed during load sequence, the
entire disc load sequence will be canceled.
Disc play
Press the CD6 button. If a CD is loaded and the
radio is playing, the radio turns off and the last
loaded disc starts to play.
Selected disc play
1. Press the discselect button whose disc icon
is displayed.
2. The indicator blinks during the change.
3. The CD plays after the disc is set to a play
position.
4. The indicator changes from blinking num-
bered disc to solid numbered disc and
the display shows the Disc number, Track
number and Elapsed Time.
CAT/RPT :
When the CAT/RPT button is pushed while the
compact disc is being played, the play pattern
can be changed as follows:
ALL DISC RPT → 1 DISC RPT → 1 TRACK RPT
→ ALL DISC RDM → 1 DISC RDM → ALL DISC
RPT
ALL DISC RPT: All discs loaded will be repeated.
1 DISC RPT: The disc that is currently playing will
be repeated.
1 TRACK RPT: The current track will be repeated
ALL DISC RDM: Tracks from all discs will be
played randomly.
1 DISC RDM: Tracks from the disc that is cur-
rently playing will be played randomly.
Display screen, heater, air conditioner and audio systems 4-33
੬ REVIEW COPY—
2006 Altima (l30)
Owners Manual—USA_English (nna)
02/23/06—arosenma
੭