Filter
Top Products
S-SERIES
107
7. Click the map you want to install to your Navman.
The map will change colour to yellow to indicate it has been selected.
To deselect a map, click the map again.
Note: You may need to install multiple maps to cover the required geographical area.
8. Complete the following:
If you want to ... Then ...
select an yellow map go back to step 7.
select a red map the map needs to be activated via the Internet before it can be installed;
go back to step 5.
install the selected maps to your Navman continue to step 9.
9. Select the destination media for the selected maps, then click Transfer Now.
The selected maps will be installed and change colour to green.
10. To use your Navman, disconnect the USB cable.
WARNING Do not disconnect the USB cable from the Navman USB Socket until the installed map or maps have
changed colour to green.