Filter
Top Products
PAGE 18 — MQ SP4030 SAW • OPERATION MANUAL — REV. #0 (01/22/09)
INTENDED USE
Operate the SP4030 Multiquip Saw, tools and components
in accordance with the manufacturer’s instructions. Use of
any other tools for stated operation is considered contrary
to designated use. The risk of such use lies entirely with
the user. The manufacturer cannot be held liable for damages
as a result of misuse.
ENGINE
The SP4030 saw is classified in the industry as a “high”
powered saw. This classification is particularly useful when
selecting the proper cutting tool (blade) for an application.
The MQ SP4030 saw is powered by a liquid cooled, 2
cylinder diesel engine rated at 30 HP (22.37 kW) at 3,000
RPM. Blade rotation is belt driven. Wheel drive system is
driven by a hydrostatic transmission consisting of a variable
displacement pump and two fixed displacement wheel
motors.
Refer to the engine owner’s manual for specific
instructions regarding engine operation and maintenance
practices.
WATER SYSTEM
All SP4030 saws provide a hardy water plumbing system
that evenly distributes water volume and optimum flow rate
to both sides of the blade to keep it cool when cutting. The
basic water system provides a valve that connects to a
standard garden hose. The water is delivered (via a hose)
to the saw blade.
All MQ SP4030 saws are designed, engineered and
manufactured with strict adherence to American
National Standards Institute, Inc. (ANSI) guidelines B7.1
and B7.5.
INTENDED USE / FAMILIARIZATION
FEATURES
■
Tri-position handlebars allow for 3-position adjustment
for optimal maneuverability.
■
Engine stop switch conveniently located on operator’s
control panel.
■
Console mounted with vibration control system.
■
Chassis cold-formed welded box construction.
■
Oil lubricated blade shaft bearings
■
Oil bath design, fully enclosed housing.
■
Quick disconnect blade flange system; inner flanges
mounted to shaft.
■
Blade mounting left side or right side.
■
Saw position guide helps ensure straight cuts
■
Dual water lines directly deliver water to blade.
■
Slip-on, tapered mount blade guard for ease of removal
and installation.
■
Blade raise-lower by electro-hydraulic pump.
■
Belt drive tension automatically controlled by hydraulic
tensioning system.
■
Dual filter element air filter with integral turbo pre-cleaner.
■
Hydro-gear hydrostatic transmission pump.
■
Hydro-gear hydrostatic wheel motors.
■
Travel speed up to 84 MPM (meters per minute)/ 275
FPM.
■
Automatic actuating parking brake.
■
Easy-adjust controlled depth stop.