ENGINE <4D6> -
Timing Belt
11C-27
REMOVAL SERVICE POINTS
A
A
"
TIMING BELT FRONT UPPER COVER
INSTALLATION
Attach protective tape to the engine mount bracket, and then
remove the timing belt front upper cover.
A
B
"
TIMING BELT REMOVAL
1. Align the timing marks.
2. Loosen the installation bolt of the timing belt tensioner.
3. Move the timing belt tensioner downward and loosely
tighten the bolt so that the tensioner doesn’t return; then
remove the timing belt.
Caution
If the timing belt is to be re-used, use chalk to mark
(on its flat side) an arrow indicating the clockwise
direction.
Protective tape
Timing marks
Thread diameter
´
length
´
pitch (mm)
Move to the bottom
of the slot.