Filter
Top Products
45
CHAPTER 4 SETTING AND PROCEDURE BEFORE OPERATION
4
4.4 Network Diagnostics (Online Test)
4.4.2 Setup confirmation test
4.4.2 Setup confirmation test
This test checks the switch setting of a network module.
The station number overlap status can be checked.
When the setup confirmation test is performed using a peripheral connected to the remote master station in the system
above, the following window appears. The result shows that the station number 1 has a station No. duplication error.
Peripheral Station No.0
Remote master station
Station No.2Station No.1Station No.1
Station No.4
Reserved station
Station No.
duplication error
Station No.
duplication error