Filter
Top Products
32
3.2.3 Link data send/receive processing time
This section describes the link data send/receive processing time of the MELSECNET/H remote I/O module when it is
used in MELSECNET/10 mode.
(1) Remote master station ↔ Remote I/O station
(a) Cyclic transmission (X/Y communication)
The same performance as that of the MELSECNET/10 remote I/O station is provided.
For details on the transmission delay time of the cyclic transmission (X/Y communication), refer to the
following.
Reference manual for the MELSECNET/10 network system used
(b) ZNFR instruction, ZNTO instruction
The same performance as that of the MELSECNET/10 remote I/O station is provided.
For the transmission delay time of ZNFR instruction and ZNTO instruction, refer to the following.
Reference manual for the MELSECNET/10 network system used
(2) Refresh time between the MELSECNET/H remote I/O module and I/O modules
The same performance as that of the MELSECNET/H remote I/O station is provided.
For the refresh time between the MELSECNET/H remote I/O module and I/O modules, refer to the following.
Q Corresponding MELSECNET/H Network System Reference Manual (Remote I/O network)
(3) Link scan time
The same performance as that of the MELSECNET/10 remote I/O station is provided.
For the link scan time, refer to the following.
Reference manual for the MELSECNET/10 network system used