Filter
Top Products
21
CHAPTER 2 SYSTEM CONFIGURATION
2
2.2 Applicable System
(5) Applicable modules
The MELSEC-Q series modules can be used with the MELSECNET/H remote I/O module. Note that some
modules have restrictions.
(a) Functional restrictions
The use of interrupt pointers and dedicated instructions for intelligent function modules are not supported.
(b) Number of mountable modules
(c) Modules with restrictions
(6) Units/modules not applicable
The following units/modules cannot be used on the MELSECNET/H (MELSECNET/10 mode) remote I/O station.
*1 These modules cannot be used when switched to interrupt modules by turning off the function selecting switch (SW2).
(7) ERR. contact of power supply module
The operation of the ERR. contact of a power supply module differs depending on the combination with the base
unit used. For the operation of the ERR. contact, refer to the following.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
Model Number of mountable modules
QJ71E71-B5, QJ71E71-B2, QJ71E71-100, QJ71E71 Max. 4
QJ61BT11N, QJ61BT11 Max. 4
Modules other than above Max. 64
Model Restrictions
QJ71E71-B5, QJ71E71-B2, QJ71E71-100, QJ71E71
• Only the function version B or later can
be used.
• The e-mail function is not supported.
Module/Unit Model
Redundant type extension base unit Q65WRB
A/AnS series extension base unit QA1S65B, QA1S68B, QA65B, QA68B
CC-Link IE Controller Network module QJ71GP21-SX, QJ71GP21S-SX
CC-Link IE Field Network master/local module QJ71GF11-T2
MELSECNET/H network module
QJ71LP21, QJ71LP21GE, QJ71LP21-25, QJ71LP21S-25,
QJ71LP21G, QJ71BR11, QJ71NT11B
Web server module QJ71WS96
MES interface module QJ71MES96
AS-i master module QJ71AS92
High speed data logger module QD81DL96
Interrupt module
QI60, QX40H
*1
, QX70H
*1
, QX80H
*1
, QX90H
*1