Filter
Top Products
154
Controls in detail
Control system
Setting night security illumination
(Exterior lamps delayed switch-off)
Use this function to set whether and for
how long you would like the exterior lamps
to illuminate during darkness after exiting
the vehicle and the doors closed. With the
delayed switch-off feature activated and
the exterior lamp switch in position U
before the engine is turned off, the follow-
ing lamps will switch on after you have
removed the SmartKey from the starter
switch:
ț Parking lamps
ț Tail lamps
ț License plate lamps
ț Side marker lamps
ț Front fog lamps
If you do not open a door after removing
the SmartKey from the starter switch, the
lamps will switch off automatically after
approximately 60 seconds.
̈ Move the selection marker with button
æ or ç to the
Lighting
sub-
menu.
̈ Press button j or k repeatedly
until you see
Headlamps delayed
switch-off
in the multifunction dis-
play.
The selection marker is on the current
setting.
̈ Press button æ or ç to select
the desired lamp-on period.
ț
0 s
, the delayed switch-off feature
is deactivated.
ț
15 s
,
30 s
,
45 s
or
60 s
, select the
desired lamp-on period.
̈ Turn the exterior lamp switch to posi-
tion U before turning off the engine
(
୴ page 48).
i
You can reactivate this function within
ten minutes by opening a door.