Filter
Top Products
131
Controls in detail
Instrument cluster
̄ Instrument cluster
For a full view illustration of the instrument
cluster, see “Instrument cluster”
(
୴ page 24).
The instrument cluster is activated when
you
ț open a door
ț switch on the ignition
ț press the reset button (୴ page 24)
ț switch on the exterior lamps
Opening a door will activate the instrument
cluster only for about 30 seconds.
You can change the instrument cluster set-
tings in the Instrument cluster submenu of
the control system (
୴ page 148).
Instrument cluster illumination
Use the reset button to adjust the illumina-
tion brightness for the instrument cluster
and the switches on the center console.
To brighten illumination
̈ Turn the reset button in the instrument
cluster (
୴ page 24) clockwise.
The instrument cluster illumination will
brighten.
To dim illumination
̈ Turn the reset button in the instrument
cluster (
୴ page 24) counterclockwise.
The instrument cluster illumination will
dim.
Coolant temperature gauge
i
The instrument cluster illumination is
dimmed or brightened to suit ambient
light conditions.
Warning G
ț Driving when your engine is badly over-
heated can cause some fluids which
may have leaked into the engine com-
partment to catch fire. You could be se-
riously burned.
ț Steam from an overheated engine can
cause serious burns an can occur just by
opening the hood. Stay away from the
engine if you see or hear steam coming
from it.
Turn off the engine, get out of the vehicle
and do not stand near the vehicle until the
engine has cooled down.