Filter
Top Products
151
Controls in detail
Control system
Setting the time (minutes)
This function is only available if the func-
tion
Time sync. with head unit
(
୴ page 149) has been set to
Off
. The time
is then not set automatically by the
COMAND and must be set manually if re-
quired.
̈ Move the selection marker with the
æ or ç button to the
Time
submenu.
̈ Press button j or k repeatedly
until the message
Set time Minutes
appears in the multifunction display.
The selection marker is on the minute
setting.
̈ Press button æ or ç to set the
hour.
̈ Press the reset button in the instru-
ment cluster (
୴ page 25) to confirm
the setting.
Selecting time display mode
̈ Move the selection marker with the
æ or ç button to the
Inst.
cluster
submenu.
̈ Press button j or k repeatedly
until the message
Clock
appears in the
multifunction display.
The selection marker is on the current
setting.
̈ Press æ or ç to set the
12-hour
or
24-hour
time display mode.
i
For information on setting the time, re-
fer to the separate COMAND operating
instructions.