Filter
Top Products
46
Getting started
Adjusting
With the easy-entry/exit feature activated,
the steering wheel will return to its last set
position when you
ț close the driver’s door with the ignition
switched on
or
ț insert the SmartKey into the starter
switch or press the KEYLESS-GO*
start/stop button (
୴ page 39) once
with the driver’s door closed
With the easy-entry/exit feature activated,
the steering wheel tilts upwards when you
ț remove the SmartKey from the starter
switch
or
ț open the driver’s door with the
SmartKey in starter switch position 0
or 1 or the KEYLESS-GO* start/stop
button (
୴ page 39) in position 1
i
The last set steering wheel position is stored
when
ț the ignition is switched off
ț the position is stored in memory
(
୴ page 123)
i
If the current position for the steering wheel
is in the uppermost tilt position, the steering
wheel will no longer be able to move upward
when the easy-entry/exit feature is activated.
The adjustment procedure is briefly interrupted
when the engine is started.
Warning! G
Let the system complete the adjustment
procedure before setting the vehicle in mo-
tion. All steering wheel adjustment must be
completed before setting the vehicle in mo-
tion. Driving off with the steering wheel still
adjusting could cause the driver to lose con-
trol of the vehicle.