Filter
Top Products
150
Controls in detail
Control system
1 Current CD (for CD changer)
2 Current track
̈ Press button k or j repeatedly
until the desired track is selected.
Selecting MP3-CD track
̈ Turn on COMAND and select CD or
CD changer*. Refer to separate
COMAND operating instructions.
̈ Press button è or ÿ repeatedly
until the settings for the MP3-CD cur-
rently being played appear in the multi-
function display.
1 MP3 mode
2 Current track
NAV* menu
The
NAV
menu contains the functions
needed to operate your navigation system.
̈ Press button è or ÿ repeatedly
until the message
NAV
appears in the
multifunction display.
ț If COMAND is switched off, the mes-
sage
NAV off
is shown in the multi-
function display.
ț With COMAND switched on but route
guidance not activated, the direction of
travel and, if available, the name of the
street currently traveled on appear in
the multifunction display.
ț With COMAND switched on and route
guidance activated, the direction of
travel and maneuver instructions ap-
pear in the multifunction display.
Please refer to the COMAND manual for
instructions on how to activate the route
guidance system.
i
To select a CD from the CD changer maga-
zine, press a number on the COMAND system
key pad located in the center console.
i
Level of information displayed will vary de-
pending on the information contained on the
MP3-CD insert in the single CD player of the
COMAND system.
To select a MP3-CD from the CD changer maga-
zine, press a number on the COMAND system
key pad located in the center console.
୴୴