Filter
Top Products
115
Controls in detail
Locking and unlocking
Valet locking
1 Neutral position
2 Locked
̈ Close the trunk (୴ page 111).
̈ Remove the mechanical key from the
SmartKey (
୴ page 398).
̈ Insert the mechanical key in the trunk
lid lock.
̈ Turn the mechanical key clockwise to
position 2 to lock the trunk.
The trunk remains locked even when the
vehicle is centrally unlocked.
̈ Insert the mechanical key in the trunk
lid lock.
̈ Turn the mechanical key counterclock-
wise to neutral position 1 to unlock the
trunk.
You can now open the trunk
(
୴ page 109).
i
If the vehicle has previously been locked us-
ing the SmartKey or KEYLESS-GO*, the exterior
lamps will flash and the alarm will sound as the
trunk opens.
To cancel the alarm, do one of the following:
ț Insert the SmartKey in the starter switch.
ț Press button Œ or ‹ on the
SmartKey.
In vehicles with KEYLESS-GO*
ț Pull an outside door handle.
The SmartKey with KEYLESS-GO must be
within 3 ft (1 m) of the vehicle.
ț Press the KEYLESS-GO* start/stop button
(
୴ page 39).
The SmartKey with KEYLESS-GO must be in-
side the vehicle.
i
To deny any unauthorized person access to
the trunk, e.g. when you valet park the vehicle,
lock it separately with the mechanical key. Leave
only the SmartKey or SmartKey with
KEYLESS-GO* less its mechanical key with the
vehicle.
i
You can only cancel the separate trunk lock-
ing mode by means of the mechanical key.