Filter
Top Products
451
Practical hints
Replacing wiper blades
Vehicles with KEYLESS-GO*
̈ Turn off the engine (୴ page 64).
With the driver’s door closed, the start-
er switch is now in position 1.
̈ Turn combination switch to wiper
setting U (
୴ page 58).
̈ With wiper arms in the vertical position,
open the driver’s door.
The starter switch is set to position 0,
same as SmartKey removed from start-
er switch.
̈ Turn combination switch to wiper
setting 0 (
୴ page 58).
Removing wiper blades
̈ Fold the wiper arm forward until it
snaps into place.
̈ Turn the wiper blade at a right angle to
wiper arm.
̈ Slide the wiper blade sideways out of
the retainer.
Installing wiper blades
̈ Slide the wiper blade onto wiper arm
until it locks in place.
̈ Rotate the wiper blade into position
parallel to the wiper arm.
̈ Fold the wiper arm backward to rest on
the windshield. Make sure you hold on
to the wiper when folding the wiper arm
back.
!
Do not pull on the wiper blade inserts. They
could tear.