Filter
Top Products
293
Controls in detail
Useful features
̈ Push the top of the mobile phone in di-
rection of arrow 1, until the lug on the
mobile phone release button engages.
The mobile phone is connected to the
network via the external antenna.
The mobile phone is linked to the
hands-free device and the multifunc-
tion steering wheel.
The battery is charged depending on its
charge status and the position of the
SmartKey in the starter switch. The
charge procedure will be indicated in
the mobile phone’s display.
You can place or receive phone calls. You
can control other functions of the mobile
phone via the control system
(
୴ page 181), COMAND* or Voice Control
System* (see separate operating instruc-
tions).
Removing mobile phone from mobile
phone cradle
Example illustration
1 Release catch for mobile phone
2 Mobile phone cradle
̈ Press release catch in direction of
arrow 1 and take mobile phone out of
mobile phone cradle 2.
Changing mobile phone cradle
If you require a different cradle for your
mobile phone, remove the present cradle
before installing a new one.
Removing an existing mobile phone
cradle
Example illustration
1 To release the mobile phone cradle
2 To remove the mobile phone cradle
3 Mobile phone cradle
̈ Press release button in direction of
arrow 1 and take mobile phone
cradle 3 out in direction of arrow 2.
i
When you take the SmartKey or SmartKey
with KEYLESS-GO* out of the starter switch, the
mobile phone remains switched on for approxi-
mately 10 minutes. If you place or receive a call
during this time, the mobile phone switches off
10 minutes after the call has been completed.
i
When using a flip-style mobile phone, open
flip top before removing from the cradle while a
call is connected. Otherwise, the call will be dis-
connected.