Filter
Top Products
290
Controls in detail
Useful features
Switching on
̈ Switch on the ignition (୴ page 37).
̈ Turn switch at the tip of stalk in direc-
tion of arrow 1 (
୴ page 289).
The steering wheel is heated. Indicator
lamp 3 (
୴ page 289) comes on.
Switching off
̈ Turn switch at the tip of stalk in direc-
tion of arrow 2 (
୴ page 289).
The heated steering wheel is switched
off. Indicator lamp 3 (
୴ page 289)
goes out.
For information on steering wheel, see
“Multifunction steering wheel”
(
୴ page 152).
Floormats
1 Retainer pin
2 Eyelet
i
The steering wheel heating is temporarily
suspended while indicator lamp 3
(
୴ page 289) remains on when
ț the temperature of the vehicle interior is
above 86°F (30°C)
ț the temperature of the steering wheel is
above 95°F (35°C)
When these conditions do not apply anymore,
steering wheel heating continues.
i
Indicator lamp 3 (୴ page 289) flashes or
goes out
ț in case of power surge or undervoltage
ț in case of a steering wheel heating malfunc-
tion
i
The steering wheel heating switches off au-
tomatically when you remove the SmartKey from
the starter switch or, on vehicles with
KEYLESS-GO*, when you switch off the ignition
(
୴ page 64) and open the driver’s door.
i
To install or remove the floormat more easi-
ly, move the driver’s seat or front passenger seat
as far to the rear as possible (
୴ page 43).
Warning! G
Whenever you are using floormats, make
sure there is enough clearance and that the
floormats are securely fastened.
Floormats should always be securely fas-
tened using eyelets 2 and retainer pins 1.