Filter
Top Products
77
Safety and Security
Occupant safety
Installation of infant and child restraint
systems
This vehicle is equipped with a tether an-
chorage for a top tether strap behind the
passenger seat.
1 Cover of anchorage ring
̈ To have better access to the anchorage
ring, move the passenger seat forward
(
୴ page 43).
̈ Remove cover 1 in direction of the ar-
row from anchorage ring 3.
̈ Guide tether strap according to the
child restraint manufacturer’s instruc-
tions.
Make sure the tether strap is not
twisted.
2 Hook
3 Anchorage ring
̈ Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 3.
̈ Move the passenger seat back as far to
the rear as possible.
Once the top tether anchorage hook is
attached, the child restraint itself can be
secured.
̈ Properly secure the child restraint us-
ing the passenger seat lap/shoulder
belt (
୴ page 73) and tether anchorage
for top tether strap, fully in accordance
with the child restraint manufacturer’s
instructions.
̈ Tighten the top tether strap according
to the child restraint manufacturer’s in-
structions.
̈ Reinstall cover 1 after removing the
tether strap.
i
For safety, make sure the hook has
attached to the ring beyond the safety
catch, as illustrated.