Filter
Top Products
224
Controls in detail
Useful features
Dust cover
Warning! G
Allow the engine to cool down completely
before slipping the dust cover on your vehi-
cle. Otherwise you could be seriously
burned when coming into contact with the
hot exhaust system.
!
To avoid damage to the vehicle and the
dust cover, observe the following:
ț Use the dust cover only when the
vehicle is garaged.
ț Cover the vehicle only when the en-
gine has cooled down completely.
ț The vehicle as well as the dust cov-
er must be dry before slipping the
dust cover on the vehicle.
ț Remove the padlock that serves as
an anti-theft device before slipping
the dust cover on or off
(
୴ page 226).
ț To avoid scratches, make sure the
zip fastener and the steel cable do
not come into contact with the vehi-
cle (
୴ page 226).
ț Make sure the dust cover is clean
and dry before inserting it in the bag
provided with the dust cover.
i
Clean the dust cover according to the
care label on the inside of the dust cov-
er.