Filter
Top Products
194
Controls in detail
Power windows
Opening the windows
̈ Press switch 1 or 2 to the resistance
point.
The corresponding window will move
downwards until you release the
switch.
Closing the windows
̈ Pull switch 1 or 2 to the resistance
point.
The corresponding window will move
upwards until you release the switch.
Fully opening the windows
(Express-open)
̈ Press switch 1 or 2 past the resis-
tance point and release.
The corresponding window opens com-
pletely.
Fully closing the windows
(Express-close)
̈ Pull switch 1 or 2 past the
resistance point and release.
The corresponding window closes
completely.
i
With the SmartKey in starter switch po-
sition 0 or removed from the starter
switch, the front power windows can
be operated:
ț until you open the driver’s or pas-
senger door
ț for at least 5 minutes
Warning! G
If you pull and hold the switch up when
closing the window, and upward movement
of the window is blocked by some obstruc-
tion including but not limited to arms, hands,
fingers, etc., the automatic reversal will not
operate.
Warning! G
Driver’s door only:
If within 5 seconds you again pull the switch
past the resistance point and release, the
automatic reversal will not function.